Naw a days we are seeing many kinds of wireless phone. It is more convenient then land phone.Verizon Wireless™Official Site - Voice Plans & Free Phone Offers at Verizon Wireless™! VerizonWireless.com
Motorola MobileSee A Full Line Of New Motorola Phones From Sprint's Now Network! www.Sprint.com
Home > Library > Miscellaneous > Wikipedia
This article or section deals primarily with the United States and does not represent a worldwide view of the subject.Please improve this article or discuss the issue on the talk page.
This history of mobile phones chronicles the development of handheld radio telephone technology from two-way radios in vehicles to handheld cellular phones.
In the beginning, two-way radios (known as mobile rigs) were used in vehicles such as taxicabs, police cruisers, ambulances, and the like, but were not mobile phones because they were not normally connected to the telephone network. Users could not dial phone numbers from their mobile radios in their vehicles. A large community of mobile radio users, known as the mobileers, popularized the technology that would eventually give way to the mobile phone. Originally, mobile phones were permanently installed in vehicles, but later versions such as the so-called transportables or "bag phones" were equipped with a cigarette lighter plug so that they could also be carried, and thus could be used as either mobile or as portable two-way radios. During the early 1940s, Motorola developed a backpacked two-way radio, the Walkie-Talkie and later developed a large hand-held two-way radio for the US military. This battery powered "Handie-Talkie" (HT) was about the size of a man's forearm.
Contents[hide]
1 Early years
2 First generation
3 Second generation
4 Third generation
5 Patents
6 See also
7 Notes
8 References
9 External links
//
Early years
In December 1947, Douglas H. Ring and W. Rae Young, Bell Labs engineers, proposed hexagonal cells for mobile phones.[1] Philip T. Porter, also of Bell Labs, proposed that the cell towers be at the corners of the hexagons rather than the centers and have directional antennas that would transmit/receive in 3 directions (see picture at right) into 3 adjacent hexagon cells.[2] [3] The technology did not exist then and the frequencies had not yet been allocated. Cellular technology was undeveloped until the 1960s, when Richard H. Frenkiel and Joel S. Engel of Bell Labs developed the electronics.
In Europe, radio telephony was first used on the first-class passenger trains between Berlin and Hamburg in 1926. At the same time, radio telephony was introduced on passenger airplanes for air traffic security. Later radio telephony was introduced on a large scale in German tanks during the Second World War. After the war German police in the British zone of occupation first used disused tank telephony equipment to run the first radio patrol cars.[citation needed] In all of these cases the service was confined to specialists that were trained to use the equipment. In the early 1950s ships on the Rhine were among the first to use radio telephony with an untrained end customer as a user.
Recognizable mobile phones with direct dialing have existed at least since the 1950s. In the 1954 movie Sabrina, the businessman Linus Larrabee (played by Humphrey Bogart) makes a call from the phone in the back of his limousine.
The first fully automatic mobile phone system, called MTA (Mobile Telephone system A), was developed by Ericcson and commercially released in Sweden in 1956. This was the first system that didn't require any kind of manual control, but had the disadvantage of a phone weight of 40 kg (90 lb). MTB, an upgraded version with transistors, weighing 9 kg (20 lb), was introduced in 1965 and used DTMF signaling. It had 150 customers in the beginning and 600 when it shut down in 1983.
In 1967, each mobile phone had to stay within the cell area serviced by one base station throughout the phone call. This did not provide continuity of automatic telephone service to mobile phones moving through several cell areas. In 1970 Amos E. Joel, Jr., another Bell Labs engineer,[4] invented an automatic "call handoff" system to allow mobile phones to move through several cell areas during a single conversation without loss of conversation.
In December 1971, AT&T submitted a proposal for cellular service to the Federal Communications Commission (FCC). After years of hearings, the FCC approved the proposal in 1982 for Advanced Mobile Phone Service (AMPS) and allocated frequencies in the 824-894 MHz band.[5] Analog AMPS was superseded by Digital AMPS in 1990.
One of the first truly successful public commercial mobile phone networks was the ARP network in Finland, launched in 1971. Posthumously, ARP is sometimes viewed as a zero generation (0G) cellular network, being slightly above previous proprietary and limited coverage networks.
Dr. Martin Cooper of Motorola, made the first US analogue mobile phone call on a larger prototype model in 1973.
On April 3, 1973, Motorola employee Dr. Martin Cooper placed a call to rival Joel Engel, head of research at AT&T's Bell Labs, while walking the streets of New York City talking on the first Motorola DynaTAC prototype in front of reporters. Motorola has a long history of making automotive radio, especially two-way radios for taxicabs and police cruisers.
In 1978, Bell Labs launched a trial of first commercial cellular network in Chicago using AMPS [1].
First generation
Main article: 1G
The first commercial launch of cellular telecoms was launched by NET in Tokyo Japan in 1979. In 1981 the NMT system was launched in Denmark, Finland, Norway and Sweden. The first handheld mobile phone in the US market was the Motorola_Dyna 8000X, which received approval in 1983. Mobile phones began to proliferate through the 1980s with the introduction of "cellular" phones based on cellular networks with multiple base stations located relatively close to each other, and protocols for the automated "handover" between two cells when a phone moved from one cell to the other. At this time analog transmission was in use in all systems. Mobile phones were somewhat larger than current ones, and at first, all were designed for permanent installation in vehicles (hence the term car phone). Soon, some of these bulky units were converted for use as "transportable" phones the size of a briefcase. Motorola introduced the first truly portable, hand held phone. These systems (NIT, AMPS, SACS, RT MI, C-Net, and Radio com 2000) later became known as first generation (1G) mobile phones.
Motorola MobileSee A Full Line Of New Motorola Phones From Sprint's Now Network! www.Sprint.com
Home > Library > Miscellaneous > Wikipedia
This article or section deals primarily with the United States and does not represent a worldwide view of the subject.Please improve this article or discuss the issue on the talk page.
This history of mobile phones chronicles the development of handheld radio telephone technology from two-way radios in vehicles to handheld cellular phones.
In the beginning, two-way radios (known as mobile rigs) were used in vehicles such as taxicabs, police cruisers, ambulances, and the like, but were not mobile phones because they were not normally connected to the telephone network. Users could not dial phone numbers from their mobile radios in their vehicles. A large community of mobile radio users, known as the mobileers, popularized the technology that would eventually give way to the mobile phone. Originally, mobile phones were permanently installed in vehicles, but later versions such as the so-called transportables or "bag phones" were equipped with a cigarette lighter plug so that they could also be carried, and thus could be used as either mobile or as portable two-way radios. During the early 1940s, Motorola developed a backpacked two-way radio, the Walkie-Talkie and later developed a large hand-held two-way radio for the US military. This battery powered "Handie-Talkie" (HT) was about the size of a man's forearm.
Contents[hide]
1 Early years
2 First generation
3 Second generation
4 Third generation
5 Patents
6 See also
7 Notes
8 References
9 External links
//
Early years
In December 1947, Douglas H. Ring and W. Rae Young, Bell Labs engineers, proposed hexagonal cells for mobile phones.[1] Philip T. Porter, also of Bell Labs, proposed that the cell towers be at the corners of the hexagons rather than the centers and have directional antennas that would transmit/receive in 3 directions (see picture at right) into 3 adjacent hexagon cells.[2] [3] The technology did not exist then and the frequencies had not yet been allocated. Cellular technology was undeveloped until the 1960s, when Richard H. Frenkiel and Joel S. Engel of Bell Labs developed the electronics.
In Europe, radio telephony was first used on the first-class passenger trains between Berlin and Hamburg in 1926. At the same time, radio telephony was introduced on passenger airplanes for air traffic security. Later radio telephony was introduced on a large scale in German tanks during the Second World War. After the war German police in the British zone of occupation first used disused tank telephony equipment to run the first radio patrol cars.[citation needed] In all of these cases the service was confined to specialists that were trained to use the equipment. In the early 1950s ships on the Rhine were among the first to use radio telephony with an untrained end customer as a user.
Recognizable mobile phones with direct dialing have existed at least since the 1950s. In the 1954 movie Sabrina, the businessman Linus Larrabee (played by Humphrey Bogart) makes a call from the phone in the back of his limousine.
The first fully automatic mobile phone system, called MTA (Mobile Telephone system A), was developed by Ericcson and commercially released in Sweden in 1956. This was the first system that didn't require any kind of manual control, but had the disadvantage of a phone weight of 40 kg (90 lb). MTB, an upgraded version with transistors, weighing 9 kg (20 lb), was introduced in 1965 and used DTMF signaling. It had 150 customers in the beginning and 600 when it shut down in 1983.
In 1967, each mobile phone had to stay within the cell area serviced by one base station throughout the phone call. This did not provide continuity of automatic telephone service to mobile phones moving through several cell areas. In 1970 Amos E. Joel, Jr., another Bell Labs engineer,[4] invented an automatic "call handoff" system to allow mobile phones to move through several cell areas during a single conversation without loss of conversation.
In December 1971, AT&T submitted a proposal for cellular service to the Federal Communications Commission (FCC). After years of hearings, the FCC approved the proposal in 1982 for Advanced Mobile Phone Service (AMPS) and allocated frequencies in the 824-894 MHz band.[5] Analog AMPS was superseded by Digital AMPS in 1990.
One of the first truly successful public commercial mobile phone networks was the ARP network in Finland, launched in 1971. Posthumously, ARP is sometimes viewed as a zero generation (0G) cellular network, being slightly above previous proprietary and limited coverage networks.
Dr. Martin Cooper of Motorola, made the first US analogue mobile phone call on a larger prototype model in 1973.
On April 3, 1973, Motorola employee Dr. Martin Cooper placed a call to rival Joel Engel, head of research at AT&T's Bell Labs, while walking the streets of New York City talking on the first Motorola DynaTAC prototype in front of reporters. Motorola has a long history of making automotive radio, especially two-way radios for taxicabs and police cruisers.
In 1978, Bell Labs launched a trial of first commercial cellular network in Chicago using AMPS [1].
First generation
Main article: 1G
The first commercial launch of cellular telecoms was launched by NET in Tokyo Japan in 1979. In 1981 the NMT system was launched in Denmark, Finland, Norway and Sweden. The first handheld mobile phone in the US market was the Motorola_Dyna 8000X, which received approval in 1983. Mobile phones began to proliferate through the 1980s with the introduction of "cellular" phones based on cellular networks with multiple base stations located relatively close to each other, and protocols for the automated "handover" between two cells when a phone moved from one cell to the other. At this time analog transmission was in use in all systems. Mobile phones were somewhat larger than current ones, and at first, all were designed for permanent installation in vehicles (hence the term car phone). Soon, some of these bulky units were converted for use as "transportable" phones the size of a briefcase. Motorola introduced the first truly portable, hand held phone. These systems (NIT, AMPS, SACS, RT MI, C-Net, and Radio com 2000) later became known as first generation (1G) mobile phones.
